Pro
EN

InvisaCook

InvisaCook

InvisaCook is an induction hob positioned under the kitchen countertop, which heats the pans through the surface. It enables cooking directly on the surface, and use of the surface when the cooking system is inactive.

  • Approved for Caesarstone Outdoor and Caesarstone Porcelain with the guidelines below
  • Not approved for indoor Caesarstone quartz, Caesarstone MineralTM or Caesarstone ICONTM surfaces

Guidelines

Fabrication

  • It is not necessary to remove the fiberglass mesh backing from the Porcelain slab.

Installation

  • Installation should be performed only by a certified InvisaCook installer and according to the manufacturer’s instructions.
  • Install at a minimum distance of 20 cm from a corner or join.
  • Manufacturer’s installation instructions:

Care & Maintenance

  • Due to the working environment the surface may become stained. It is therefore necessary to ensure that the surface is cleaned after cooking and cooling of the area to prevent stubborn stains in the future.
  • Clean according to the Caesarstone Care & Maintenance guidelines.

Usage

  • The system is intended for cooking time of up to 5 hours. It is not to be used as a hot plate to keep food warm for extended periods.

Safety

  • Note that when using InvisaCook the surface may become hot to the touch.

InvisaCook Online

Caesarstone provides warranty for applications fabricated from Caesarstone surfaces, and for Caesarstone surfaces in which products are installed, provided that those appliances and applications are approved for use by Caesarstone, and installed in accordance with the manufacturer’s instructions, Caesarstone fabrication and installation guidelines, and any additional guidelines relating to those appliances and applications. A complete list of approved appliances and applications with guidelines is available at https://mos.caesarstoneus.com/home-page/lobby-collection/special-applications-products/

Table of contents

Table of contents